deep groove ball bearings
Deep groove ball bearings are the most widely used bearing type and are particularly versatile. They have low friction and are optimized for low noise and low vibration which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than other bearing types.
Single-row deep groove ball bearings are the most common type of rolling bearings. Their use is very widespread. In addition to open type bearings, these bearings often have steel shields or rubber seals installed on one or both sides and are prelubricated with grease.
- 50 mm x 80 mm x 23 mm Fersa 63010-2RS deep groove ball bearings
- 37.306 mm
- 182.563 mm
- 9 mm x 26 mm x 8 mm Fersa 629 deep groove ball bearings
- 160000 N
- 128000 N
- 45 mm x 120 mm x 29 mm Fersa 6409-2RS deep groove ball bearings
- 17000 rpm
- 15.9 mm
- 160 mm x 240 mm x 38 mm SIGMA 6032 deep groove ball bearings
- 560000 N
- 390000 N
- 20 mm x 47 mm x 15,24 mm SIGMA 87504 deep groove ball bearings
- 29.8 mm
- 44.6 mm
- 50,8 mm x 114,3 mm x 26,99 mm SIGMA MJ 2 deep groove ball bearings
- 4.82 kN
- 17 000 min-1
- 95 mm x 200 mm x 45 mm SIGMA 6319 deep groove ball bearings
- 70000 r/min
- 0.0028 kg